How much clearance do you need around a wood burning stove?


How do you take care of a wood-burning fireplace?

Fireplace Maintenance: 10 Tips for Maintaining a Wood-Burning Fireplace

Is a wood-burning stove better than a fireplace?

Like a fireplace, a wood-burning stove can help warm your home during the otherwise cold winter months. Wood-burning stoves, in fact, are actually more efficient at converting wood to heat than fireplaces. Therefore, wood-burning stoves are up to three times more efficient than fireplaces.

What do you need for a wood burning fireplace?

While there are some things you can probably get by without, there are several accessories that will make life with a fireplace easier.

How thick does a hearth pad need to be?

The hearth pad requires a thickness of at least 2 inches. However, if the fireplace’s floor is at least 8 inches taller than the hearth extension, the hearth extension’s thickness must only be at least 3/8 inch.

What is the code for fireplace hearth?

For Your Hearth Your fireplace hearth must extend at least 16 inches beyond the fireplace opening and at least 8 inches on either side of the firebox, according to the International Code Council. Hearth extensions will need to be at least 2 inches thick.

Can you put a hearth on wooden floor?

The heat in the hearth stone can make the wood flooring tinder dry creating a high fire risk should any embers get on it. Depends if you’re using a soiild fuel fire (then cut the boards out) or gas (no need to bother).

Does a hearth have to be raised?

The perimeter of the hearth should be clearly defined by either using a raised edge or by raising the level of the hearth in relation to the floor. A freestanding stove which is not in a recess should have a hearth at least 840 x 840mm.

Do you need planning permission to install a wood burning stove?

Do You Need Planning Permission to Install a Wood Burning Stove? If you fit your stove yourself, or have a non-HETAS installer do the job, you will need to tell your local Building Control department before you start any work. This isn’t strictly planning permission, but is a necessary step.

Do you need a hearth for a wood burner?

Is a hearth necessary for a log burner or stove? If you have any solid fuel burning stove, it is absolutely vital that you have the correct hearth for it to sit on. Building regulations state that a non-combustible material must cover a set area around your stove.

Can I use cement board under a wood stove?

Safe wood stove installations require a heat shield that will prevent heat from the wood stove from creating a fire hazard in the building materials that form the exterior wall. Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application.

Can you put tile under a wood stove?

Short answer: Yes, absolutely, but we would recommend using porcelain tiles or hardier floor-suitable ceramic tiles, which are very heat resistance. We’d also recommend using Palace Heat Resistant Adhesive, and keeping a gap of 6 inches around the back and sides of your stove.

What tiles to put behind a wood burning stove?

We recommend using porcelain tiles, which are very heat resistant. Most wood burning stoves have insulation blocks in the back and sides to minimise the heat escaping, and there should also be a minimum of 150mm (6 inches) around the back and the side of the stove for ventilation.

How do you fireproof a wall behind a wood stove?

Faux Panels. A common way to help protect the wall behind a wood stove and create a backdrop for your stove includes using masonry veneer faux panels. Stone or brick is a common material to use behind a wood burning stove. These panels help create more of a focal point for a room.

How far should furniture be away from a wood stove?

three feet

How far from the wall does a wood stove need to be?

The standard clearance recommended by the National Fire Protection Agency is 36 inches. This means that the back of the stove should be 36 inches away from any combustible material, such as woodwork, unprotected walls, furniture and even firewood.

How much clearance do you need around a wood burning stove?

At least 36 inches of clearance must be allowed between the top of a stove and an unprotected ceiling. Brick or stone provide little or no protection for a combustible wall since they are good conductors of heat. Therefore, by themselves, these are not suitable as wall protectors.